Amplifier

Module number: 36

Part number:
8005108

Other markings: A6143261 E

Compatible models:
BeoLab 6002

Compatible model type numbers:
6832, 6833

Difficulty: Involved (~20-30 minutes)

Slide the fret upwards to remove it.

Lay the speaker on a soft surface, and remove the floor stand by loosening the 3 2.5mm hex screws.

Remove the 8 TX10 holding the heat sink, and lift the assembly out – though it may still be held in firmly by the gasket adhesive.

Remove the connectors and 4 TX10 screws securing the amplifier.

Upon reassembly, it is not usually necessary to replace the gaskets unless they are damaged. When refitting the fret, line it up only around a 1 cm from the bottom before sliding it back into place.