Amplifier

Module number: part of 999

Part number:
part of 8052223, 8053060, 8053070, 8053146, 8053070

Other markings: A6143261 E

Compatible models:
BeoLab 3
BeoLab 7

Compatible model type numbers: 6871, 6872, 6873, 6874, 6875, 6876, 6877, 6878, 6879, 6881, 6882, 6883, 6884, 6885, 6886, 6887, 6888, 6891, 6892, 6893, 6894, 6895, 6896, 6897

6210, 6212, 6213, 6214

Difficulty:

BeoLab 3
Involved (~45 minutes - 1 hour)

BeoLab 7
Lightly involved (~20-30 minutes)

BeoLab 3:
Unscrew the top plate from the acoustic lens. Remove the two TX15 screws, and lift off the lens.

Pry the three bezels from around the woofer and radiators, undo the 4 TX10 screws on each, and remove the drivers.

Pry off the aluminium tweeter cover, and remove the single long TX30 screw. Lift the top casting of the speaker, and remove it after unplugging the tweeter and connectors.

Remove the main electronic chassis by removing the 5 TX15 screws, and a 6th holding the heat sink. The amplifier is removed with the 4 last TX10 screws.


BeoLab 7:
Slide the grille to the left to remove it.

Undo the 22 TX20 screws holding the two baffles, and the 3 TX10 screws holding the centre module. All parts will also be attached by their gaskets.

The amplifier then can be removed from the centre module by undoing the 5 TX10 screws