Aerial

Part number:
8720072

Compatible models:
BeoSound 3

Compatible model type numbers:
2720, 2721, 2722

Difficulty:
Easy to involved (~2-30 minutes)

The aerial screws and unscrews in and out of place.

If the aerial is within the cabinet but intact, invert the set and shake it until the aerial has extended enough to be lifted manually, from where it can be unscrewed.

If the aerial is stuck inside the cabinet, full disassembly is necessary: Remove the four TX10 screws on the base, and unplug the base module. Push in the tab holding the front grille, and slide it down to remove.

Unplug the keyboard, and release its retaining spring by inserting a screwdriver into the rectangular hole to the left of the keyboard cable. Remove gently.

Unscrew the two TX10 screws retaining the handle and holders. Pull the handle outwards on one side, and the holder will fall away.

Remove the 8 TX10 screws holding the inner cabinet, and slide it carefully out of the top of the extrusion.

Remove the FM module with 3 TX10 screws, and slide the motor loader for the aerial off the cabinet. A slot for driving the aerial belt manually is now accessible.

If replacement of the entire motor loader module is necessary, please contact me.