Display & microcontroller

Module number: 3

Part number:
8008024

Compatible models:
BeoSound 3

Compatible model type numbers:
2720, 2721, 2722

Lightly involved (~20-40 minutes)

Remove the four TX10 screws on the base, and unplug the base module. Push in the tab holding the front grille, and slide down to remove it.

Unplug the keyboard, and release its retaining spring by inserting a screwdriver into the rectangular hole to the left of the keyboard cable. Remove gently.

Unscrew the two TX10 screws retaining the handle and holders. Pull the handle outwards on one side, and the holder will fall away.

Remove the 4 TX10 screws holding the internal cabinet, and slide it up and out of the extruded cabinet: the microcontroller module is held with 4 TX10 screws.