Cabinet

Module number: Includes LED module 4 8002622

Part numbers: 3430049

Compatible models:
BeoLab 4

Compatible product type numbers:
6650, 6651, 6652

Difficulty: slightly fiddly (~10-20 minutes)

Tools required: T20 driver, spudger or trim tool, optional heat gun

Remove all plugs and all 3 speaker frets, being careful not to break their clips. Unscrew the 6 T20 screws holding the pyramid of the cabinet to the base. Use a spudger or a tool inserted into the slot near the rear corner of the cabinet to pry the cabinet from the base, which is sealed with an adhesive gasket and may take some force.

Unplug the LED connector to the filter module, and the speaker connector from the amplifier to free the outgoing cabinet.

It is not usually necessary to renew the gasket upon installation.