Cassette board
Cassette board
SKU:01-BC250-8004913A
Cassette board with green connector for Beosound and Beocenter models
More info
More info
Check the connector colour and board number is correct with the outgoing part.
Later models may have a green connector which is electrically compatible but doesn't quite fit.
Module number: 3
Part number:
8004913
Other markings:
6142025J, 6142025K, 8004842, 51710207
Compatibility
Compatibility
Compatible models:
BeoSound Ouverture
Beocenter 9300
Compatible model type numbers:
2516, 2517, 2518, 2519, 2520, 2553, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2639, 2640, 2642, 2650
Installation
Installation
Lightly involved (~20-40 mins)
Tools required:
Trim removal tool or spudger, T10 driver, Phillips driver.
Be careful of degraded adhesive on the doors, and brittle plastic on the cover clips.
Unplug the system while the doors are open. The doors and black covers are each removed by pulling firmly from their outside edges; slide the trim tool under the sides of the covers to find and push any recalcitrant clips out of the way.
Remove the two silver machine screws on the bottom of the set, and the seven screws holding the rear cover: the system can now be put into its service position by undoing the four screws holding the black steel frame in position, noting that the rightmost has a bonding wire and a lock washer.
Gently lift the rear frame out before lying it down; witness the position of the cable loom inside the bottom of the set, as cables can pinch upon assembly.
Gently undo the screws holding the cassette board in place, and unplug the 5 connectors on the board. The final cable unplugs on the cassette mechanism side.