Amplifier

Module number: 2

Part number:
8001539, 3152901

Other markings:
6142330 Rev. J

Compatible models:
Beosound Century

Compatible type numbers:
2651, 2652, 2653, 2654, 2655, 2656, 2657

Slightly fiddly (~20 minutes)

Tools required: T10 screwdriver

Remove all cables, stands, and brackets from the set other than the active antenna, if fitted.

Undo the 2 T10/slotted machine screws in the top and bottom right corners of the rear of the set, and lift the outer edge of the right fret up before sliding it outwards for removal.

Undo the 6 T10 screws B, and remove all plugs from the amplifier board.

If the replacement amplifier board is not supplied with a heat sink, you’ll need new thermal compound or pads for amplifier cooling.