3000 Front panel

Excellent condition, with only the lightest of marks to the aluminium.

Module number: 5

Part numbers:
3451632, 8230100, 3131356, 3322145, 8001362

Board number:
6143111 Ver. A

Compatible models:
BeoSound 3000

Compatible model type numbers:
2671, 2672, 2673, 2674, 2675, 2676, 2677, 2680

A little fiddly to install (~30 minutes)

Tools required:
Trim removal tool or spudger, T10 screwdriver, Phillips driver.

Be careful of degraded adhesive on the doors, and brittle plastic on the covers and threaded screw holes.

Unplug the system while the doors and clamper are open. The doors and black covers can each be removed by pulling from their outside edges; slide the trim tool under the sides of the covers to find and push any recalcitrant clips out of the way.

Eight T10 screws hold the aluminium front panel, and the clamper slides out of its carrier arm. Unplug the panel connectors, witnessing the two that are the same – the upper plug should already be colour coded with a dab of red ink.

Transfer the clamper to the new front by sliding out its two hinge pins, accessed by removing the small aluminium cover on the clamper, held from the inside by two Phillips screws.