Light and motor control

Module number: 9

Part numbers:
9001322, 8001550

Compatible models:
Beocenter 2500, Beocenter 2300, Beosystem 2500, Beosystem 2300, BeoSound Ouverture, BeoSound 3000, BeoSound 3200

Compatible model type numbers:
2601, 2606, 2607, 2608, 2609, 2610, 2611, 2612, 2615, 2616, 2617, 2618, 2619, 2620, 2626, 2630, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2639, 2640, 2642, 2650, 2671, 2672, 2673, 2674, 2675, 2676, 2677, 2680, 2681, 2682, 2683, 2684, 2685, 2686, 2687, 2690

Slightly fiddly (~10-20 minutes)

Tools required:
Trim removal tool or spudger, T10 screwdriver, Phillips driver.

Be careful of degraded adhesive on the doors, and brittle plastic on the cover clips.

Unplug the system while the doors are open. The doors and black covers are each removed by pulling firmly from their outside edges; slide the trim tool under the sides of the covers to find and push any recalcitrant clips out of the way.

The 5 T10 or Phillips screws holding the board can now be removed, and the module unplugged.