Power supply

The generic image shown may differ from the outgoing part: at least two versions were made by different suppliers during the life of the product, but all are compatible.

Module number: 2

Part numbers:
8006898, 8002480, 8006456

Other markings:
8002480

Compatible models:
Beosound 1

Compatible model type numbers:
2581, 2582, 2583, 2584, 2585, 2586, 2587, 2590, 4621, 4622, 4623, 4624, 4625, 4626, 4627

Jumper must be fitted to pins for 100-120 V operation

Easy (~10-15 minutes)

Tools required: long T15 driver

Unplug all cables. Slide the grille upwards to remove it. Remove the black plastic film around the display. Unscrew 7 T15 screws: 4 in a horizontal line above the midrange drivers, and 3 at the bottom, the centre of these being deeply recessed. Do not unscrew the upper two remaining screws.

The rear cover can now be removed: carefully unplug all connectors from the main board, and unscrew the power supply from the chassis moulding.

Ensure the jumper is fitted for 100-120 V operation.