Wall bracket

Part numbers:
1205211, 2777052, 2777053, 1205266

Type number:
2052

Compatible models:
Beocenter 2500, Beocenter 2300, Beosystem 2500, Beosystem 2300, BeoSound Ouverture, BeoSound 3000, BeoSound 3200

Compatbile model type numbers:
2601, 2606, 2607, 2608, 2609, 2610, 2611, 2612, 2615, 2616, 2617, 2618, 2619, 2620, 2621, 2622, 2623, 2624, 2626, 2630, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2639, 2640, 2642, 2650, 2671, 2672, 2673, 2674, 2675, 2676, 2677, 2680, 2681, 2682, 2683, 2684, 2685, 2686, 2687, 2690

Time needed: ~20-60 minutes

Dimensioning: Once fitted, the wall plate's lower, centre screw hole is 15.5 cm (6") from each side of the system, and 33 cm (13") from the top; at least 20 cm (8") should be left free above the top of the plate to allow for installation.

Run any concealed cables to the location of bracket before installation.
Securely fasten the wall plate to wall stud using screws and anchors as required.
On the system, remove the four lower T10/slotted screws holding the rear cover; attach the correct cast bracket onto each side of the system, and secure them with the slotted screws provided.
Insert the bracket pins into the four holes on the plate, and push down to lock.